NC HYDRO PROTECT WOOD

NC HYDRO PROTECT WOOD

NC HPW is an invisible chemical wood protection water. NC HPW protects the wood by means of coating. Ideal as a preventive measure against algae and moss on wood surfaces.

NC applies to any clean, dry timber such as a teak deck, wooden carports, wooden furniture etc. After treatment, the wood oil and water repellent.

For best results we recommend the following steps:

The surface must be clean and dry. Any old paint must be removed. NC HPW is applied by spraying. For example with Airles, HVLP, or brushes.
The application quantity depends on the substrate. For highly porous materials etc. is more NC HPW than a smooth and dense surface with small pores.

Usual consumption use are about 100/200ml per m2. The surface should be between 5 and 40 degrees. After drying HPW NC has reached its full effect. Drying at 20 ° C. for 6 hours at 10 degrees 4 hours at 30 degrees 3 hours. Use clean tools with water.

Note:

Given the variety of surfaces and environmental conditions, the information on this sheet is, in no way diminish the responsibility of the user to provide the necessary care for the intended purpose of our product. We are not liable for the non written mention of the procedure and alerts where for other purposes than those specified herein.